Advertisement
2. Enter the user name and password (d
and click Log In to access the web m
3. Click the Account tab. Set Register N
based on the data plan in step
address of the LAN port on the EGW1
4. Click Submit to finish IP phone config
You can choose Voice > Phone Alloc
management system of the EGW1520
phone.
Verify the configuration according to the c
8
document.
Starting Configuration —— Loca
St ti
C
fi
Solution
Planning Server Information
a
When the EGW1520 functions as the local g
SIP server on the central node at the headq
synchronizes them to the EGW1520. You do
the EGW1520.
Before configuration, collect user quantity in
allocation to the enterprise IT administrator.
The default outgoing prefix of the EGW1520
according to the called number change rule
Server Type
Planned Item
IP address
Port number
Data
synchronization
server
Key for data
synchronization
SIP server
address
SIP server type
SIP server
Heartbeat
detection
interval
Registration
interval
default values: admin) of the administrator
Name to the user number of the IP phone
. Se
et SIP Server to 192.168.1.1 (default IP
c
1520).
guration.
cation > IP Phone in the web
0 to view the registration status of the IP
chapter Verifying Configuration in this
ti
L
gateway in a branch in the UC solution, the
quarters allocates all user numbers and
o not need to configure user numbers on
n the branch and apply for number
0 is 888. The outgoing prefix is deleted
Remarks
Contact the e
enterprise IT administrator to obtain the IP
address of th
Contact the e
enterprise IT administrator to obtain the port
number of the
e data synchronization server. If the port
number fails t
to be obtained, use the default value 8098.
The EGW152
20 compares its data synchronization key with
that of the da
ata synchronization server. If the keys are the
same, the da
the EGW1520
0; otherwise, the EGW1520 rejects the data
synchronizati
including digi
negotiate with
h the enterprise IT administrator about the key
format.
The address
Obtain the ad
ddress from the enterprise IT administrator.
The options a
are IMS or NGN. Obtain the type from the
enterprise IT
When the SIP
P server is eSpace U1960, select NGN.
When the SIP
P server is eSpace U2900, select IMS.
Interval for th
the active and
d standby SIP servers, in seconds. The value
ranges from 3
30 to 150. The default value 90 is
recommende
Interval for th
messages for
r users in this group to the SIP server, in
seconds. The
e value ranges from 0 to 14400. The default
value 360 is r
recommended.
8
8
anagement page.
l Gateway in a Branch in the UC
l G t
i
in outgoing calls.
e data synchronization server.
ta synchronization server synchronizes data to
on. The key is a string of 1 to 22 characters
ts, letters, or special characters. You can
can be an IP address and or a domain name.
administrator.
e EGW1520 to send heartbeat messages to
d.
e registration group to send registration
B
h i th UC
Advertisement
