Dukane 8121WI User Manual page 37

NOTE
Adobe Flash
® ®
e-Control is not displayed in a web browser that does not support Flash
®
Control is displayed.
then start Web browser.
example below, and then press the Enter key or
Example: If the IP address of the projector is set to 192.168.1.10:
Enter "http://192.168.1.10/" into the address bar of the web browser
and press the Enter key or click
projector and your computer are
connected to the same network
correctly, the selection window will be
displayed.
NOTE
errors in the projector.
OSD on the projector. If you want to change it, you need to change the OSD
language on the projector. (
is created using Flash
®
Player on your computer to use Crestron e-Control
in the Network Settings (43) is set to Disable, the
®
. You need to install
®
button.
button.
3. Web Control
. Crestron
®
.
®
37