Wear ear protection whenever 21. Have your tool repaired by an juice or vinegar. In case of eye contact, rinse Your M0E-ET-410 Hedge Trimmer has been the sound level seems uncomfortable. authorized service agent. This tool is abundantly with clean water for at least 10 designed for trimming light foliage and is 9.
ORIGINAL INSTRUCTIONS ORIGINAL INSTRUCTIONS ADDITIONAL SAFETY SYMBOLS to a standstill. Do not dipose of batteries. Return 21. Do not put the tool down until the blade INSTRUCTIONS FOR exhausted batteries to your local Symbols are used in this manual to attract your has come to a complete standstill.
Page 4
ORIGINAL INSTRUCTIONS ORIGINAL INSTRUCTIONS 1. Front Handle 2. Trigger Switch 3. Lock-Off Button 4. Ventilation Slots 5. Guard 6. Battery Pack 7. Adapter 8. Charge Station 9. Chargeing Indicator 10. Power Indicator 11. Blade Sheath Cordless Hedge Trimmer Cordless Hedge Trimmer...
ORIGINAL INSTRUCTIONS ORIGINAL INSTRUCTIONS OPERATION TO REMOVE OR INSTALL receptacle of a plugged in charger and it will plugged in to the power supply, the exposed automatically charge the pack. charging contacts inside the charger can be BATTERY PACK (FIG. B) INSTRUCTIONS 1).
TECHINICAL DATA repaired. Failure to do so could result in WARNING! serious personal injury. Before commencing these cleaning Model No. M0E-ET-410 procedures or when clearing a blockage, USING THE HEDGE Voltage 18VDC make sure that the hedge trimmer is switched TRIMMER off and disconnected from the battery.
ORIGINAL INSTRUCTIONS ORIGINAL INSTRUCTIONS NOISE AND VIBRATION DATA GUARANTEE This product is selected for DOMESTIC USE ONLY and not for business use. This product is A weighted sound pressure 80dB(A) K : 3dB(A) guaranteed against manufacturing defects for a period of 12 months. This does not cover the A weighted sound power 94dB(A) K : 3dB(A)
HOME RETAIL GROUP EC DECLARATION OF CONFORMITY Home Retail Group Avebury, Milton Keynes, MK9 2NW declare that the product M0E-ET-410 Cordless hedge trimmer Function: Trimming hedges and brushes Complies with the requirements of the following directives: 2004/108/EC - EMC Directive. 2006/95/EC - Low Voltage Directive.
Need help?
Do you have a question about the M0E-ET-410 and is the answer not in the manual?
Questions and answers