Copy/Dubbing
Dubbing images onto other video
devices
You can dub by connecting an AV cable.
≥ Be sure to use a sufficiently charged battery.
≥ Connecting the AV cable in the wrong direction may cause damage to
the USB/AV connector of the unit. If the connector has become
damaged, it may not operate correctly, including failure to recognise
the cable even if it has been connected.
≥ Images are dubbed in standard quality.
≥ Set to Playback Mode.
Change the video input
on the video device and
TV that this unit is
connected to.
≥ The channel set will differ
≥ See the operating instructions of
≥ Insert the plugs as far as
≥ Do not use any other AV
A AV cable (supplied)
B Turn the side with the
(l
38)
- 153 -
depending on the terminal to
which the unit is connected.
the video device for details.
they will go.
cables except the supplied
one.
symbol up to connect.