Table of Contents
Advertisement
User Controls
1. Turn on DHCP to allow a DHCP
server to automatically assign an IP, or
manually enter the required network
information.
2. Then choose apply and press "
" button to complete the configuration
process.
3. Open your web browser and type in IP
Address from the OSD LAN screen then
the web page will display as below:
When you use the projector IP ad-
dress, you cannot link to your service
server.
46
English
How to use web browser to control your projector
4. Based on network web-page for the
input-string in [tools] tab, the limitation for
Input-Length is in the below list ("space"
and the other punctuation key included):
Category
IP Address
IP ID
Crestron Control
Port
Projector Name
Projector
Location
Assigned To
DHCP (Enabled)
IP Address
Network
Subnet Mask
Configuration
Default Gateway
DNS Server
Enabled
User Password
New Password
Confirm
Enabled
New Password
Admin Password
Confirm
Input-Length
Item
(characters)
15
2
5
10
9
9
(N/A)
15
15
15
15
(N/A)
15
15
(N/A)
15
15
Advertisement
Table of Contents
