RIDGID HD1280 Owner's Manual page 9

ASSEMBLY
Positioning Detachable Blower
(Powerhead Assembly)
1. To Remove the Detachable Blower
from the Powerhead Assembly:
Press down on the Detachable Blower
Latch under the Detachable Blower
Handle and lift the Blower off the
Powerhead Assembly of the Vac.
TO REMOVE:
ROTATE
DETACHABLE
BLOWER UP
Detachable
Blower Handle
Detachable
Blower Latch
TO REMOVE:
PRESS DOWN ON
DETACHABLE
BLOWER LATCH
2. To Replace the Detachable Blower
onto the Powerhead Assembly:
Position Detachable Blower above
the indented area of the Powerhead
Assembly. Rotate the Detachable
Blower down until the travel of the unit
stops.
3. Lightly press down on the Detachable
Blower Handle until you hear the
"snap" of the Detachable Blower Latch
engaging the Detachable Blower.
The Detachable Blower is now latched
to the Powerhead Assembly.
TO REPLACE:
ROTATE
DETACHABLE
BLOWER DOWN
9
Detachable
Blower Handle
Detachable
Blower Latch
Detachable Blower
Handle
Detachable
Blower Latch
Powerhead
Assembly