Remote Controller
Contents
1.
2. PERSONAL PRESET 1/2/3 buttons: Registers the current setting conditions
such as input selector, listening mode, etc. or call the registered settings.
(
3. Input selector buttons: Switches the input to be played.
4. Play buttons: Used for playback operations for the Music Server (
or USB device (
"21. MODE button" , an HDMI CEC function-enabled AV component can be
operated. (Depending on the device, operation may not be possible.)
5.
quickly during play on the TV screen. (
6. Cursor buttons and ENTER button: Select the item with the cursors and press
ENTER to confirm your selection. When the folder or file lists are not shown on
one screen on the TV, press
7.
8. TONE/DIALOG/SW buttons: Adjusts the sound quality of the speakers and
volume level of the subwoofer. (
9. LISTENING MODE buttons: Allows you to select the listening mode. (
10. DIMMER button: You can switch the display off or adjust the brightness of the
display in three steps.
11. ZONE 2 SHIFT button: Controls the multi-zone function. (
ZONE 3 SHIFT button is not used with this unit.)
12. SLEEP button: Set the sleep timer. Select the time from "30 min", "60 min" and
"90 min". (
13. HDMI MAIN/SUB button: Select the HDMI OUT jack to output video signals
from "MAIN", "SUB", and "MAIN+SUB".
14. INPUT SELECT button: Switches the input to be played.
15.
operate RDS (
16.
17.
18. Volume buttons
19. CLEAR button: Deletes all characters you have entered when entering text on
the TV screen.
16
Connections
≫
≫
STANDBY/ON button
p78)
p57). If the unit is switched to "CEC MODE" using
(AV ADJUST) button: Settings such as "Tone" and "Level" can be made
/
to change the screen.
button: Displays the Home. (
p102, 120,
p80)
p82)
(STATUS) button: Switches the information on the display and is used to
p74).
button: Returns the display to the previous state.
button: Temporarily mutes audio. Press again to cancel muting.
Front Panel≫ Rear Panel≫ Remote≫
Playback
Setup
≫
p60)
p129)
125)
p83)
p76) (The
≫