Pioneer VSX-934 Instruction Manual page 146

❏ The message "Noise Error" appears during Full Auto MCACC
• This can be caused by a malfunction in your speaker unit. Check the speaker output, etc.
❏ The measurement results of Full Auto MCACC show different distances to the speakers from the
actual ones
• Depending on the speakers you are using, some errors may occur in the measurement results. If this is the case, make the settings in "System
Setup" - "Speaker" - "Distance".
❏ DRC function does not work
• Make sure the source material is Dolby Digital, Dolby Digital Plus, Dolby TrueHD, or DTS.
Contents Connections
≫
146
Front Panel≫ Rear Panel≫ Remote≫
Playback Setup
≫ ≫
( p108)
≫