rtd LAN18222HR User Manual
  1. Manuals
  2. Brands
  3. rtd Manuals
  4. Controller
  5. LAN18222HR
  6. User manual

rtd LAN18222HR User Manual

Pci/104-plus dual gigabit ethernet controller
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LAN17222HR/18222HR
PCI/104-Plus Dual Gigabit Ethernet Controller
User's Manual
BDM-610020087 Rev. E
RTD Embedded Technologies, Inc.
AS9100 and ISO 9001 Certified

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LAN18222HR and is the answer not in the manual?

Questions and answers

Related Manuals for rtd LAN18222HR

Summary of Contents for rtd LAN18222HR

  • Page 1 LAN17222HR/18222HR PCI/104-Plus Dual Gigabit Ethernet Controller User’s Manual BDM-610020087 Rev. E RTD Embedded Technologies, Inc. AS9100 and ISO 9001 Certified...
  • Page 2 RTD Embedded Technologies, Inc. 103 Innovation Boulevard State College, PA 16803 USA Telephone: 814-234-8087 Fax: 814-234-5218 www.rtd.com sales@rtd.com techsupport@rtd.com...
  • Page 3 Failure to follow the instructions found in this manual may result in damage to the product described in this manual, or other components of the system. The procedure set forth in this manual shall only be performed by persons qualified to service electronic equipment. Contents and specifications within this manual are given without warranty, and are subject to change without notice. RTD Embedded Technologies, Inc. shall not be liable for errors or omissions in this manual, or for any loss, damage, or injury in connection with the use of this manual.

  • Page 4: Table Of Contents

    PCI to PCIe Bridge ................................... 17 5.2.1 PCI Express Hub Intel WG82574IT Gigabit Ethernet Controller ........................... 17 Troubleshooting Additional Information PC/104 Specifications ................................19 PCI and PCI Express Specification ............................19 Limited Warranty | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.
  • Page 5 Table 4: External LED Connector Pinout ................................11 Table 5: RJ45 Signal Assignments ..................................11 Table 6: DIL Signal Assignments .................................... 11 Table 7: PCI Slot Selector Switch ................................... 13 Table 8: LAN17222HR IDAN Pin Out ..................................15 | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 6: Introduction

    The Intelligent Data Acquisition Node (IDAN™) building block can be used in just about any combination with other IDAN building blocks to create a simple but rugged 104™ stack. This module can also be incorporated in a custom-built RTD HiDAN™ or HiDANplus High Reliability Intelligent Data Acquisition Node.

  • Page 7: Contact Information

    If you are having problems with you system, please try the steps in the Troubleshooting section of this manual. For help with this product, or any other product made by RTD, you can contact RTD Embedded Technologies technical support via the...

  • Page 8: Specifications

    JP300 = 1-2 (3.3V) , I = 1.5mA 0.33 OL3.3 PCI 5V Output High Voltage JP300 = 2-3 (5V) , I = -12mA PCI 5V Output Low Voltage JP300 = 2-3 (5V) , I = 12mA | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 9: Board Connection

    Physical Characteristics  Weight: Approximately 55 g (0.12 lbs.)  Dimensions: 90.17 mm L x 95.89 mm W (3.550 in L x 3.775 in W) Figure 2: Board Dimensions | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 10: Connectors And Jumpers

    CN2/3: ISA AT/XT Connectors The ISA AT/XT connector is the connection to ISA peripheral modules. The position and pin assignments are compliant with the PC/104 Specification. (See PC/104 Specifications on page 19) | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 11: External Led Connectors

    Receive + MDI_B- Receive - MDI_C+ Not Used MDI_C- Not Used MDI_A+ Transmit + MDI_A- Transmit - MDI_D+ Not Used MDI_D- Not Used Shield Ground Shield Ground Table 6: DIL Signal Assignments | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 12: Steps For Installing

    10. Attach any necessary cables to the PC/104 stack. 11. Re-connect the power cord and apply power to the stack. 12. Boot the system and verify that all of the hardware is working properly. Figure 5: Example 104™Stack | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 13: Switch Sw1 - Pci Slot Selector

    The PCI slot number can be configured as follows: Table 7: PCI Slot Selector Switch Switch Position PCI Slot Number Slot 0 ( Closest to CPU) Slot 1 Slot 2 Slot 3 Undefined Undefined Undefined Undefined | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 14: Idan Connections

    Weight: Approximately 0.21 Kg (0.46 lbs.)  Dimensions: 151.972 mm L x 129.978 mm W x 16.993 mm H (5.983 in L x 5.117 in W x 0.669 in H) Figure 6: IDAN Dimensions | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 15: Connectors

    Receive + MDI_C+ Not Used MDI_A+ Transmit + MDI_D+ Not Used Shield Ground MDI_B- Receive - MDI_C- Not Used MDI_A- Transmit - MDI_D- Not Used Table 8: LAN17222HR IDAN Pin Out | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 16: Steps For Installing

    10. Attach any necessary cables to the IDAN system. 11. Re-connect the power cord and apply power to the stack. 12. Boot the system and verify that all of the hardware is working properly. Figure 7: Example IDAN System | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 17: Functional Description

    Yellow LED: On indicates the link has been established. Blinks with activity  Blue LED: On indicates connection at 100 Mbps speed.  Green LED: On indicates connection at 1 Gbps speed. | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 18: Troubleshooting

    If problems persist, or you have questions about configuring this product, contact RTD Embedded Technologies via the following methods: Phone: +1-814-234-8087 E-Mail: techsupport@rtd.com Be sure to check the RTD web site (http://www.rtd.com) frequently for product updates, including newer versions of the board manual and application software. | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 19: Additional Information

    A copy of the latest PC/104 specifications can be found on the webpage for the PC/104 Embedded Consortium: www.pc104.org PCI and PCI Express Specification A copy of the latest PCI and PCI Express specifications can be found on the webpage for the PCI Special Interest Group: www.pcisig.com | www.rtd.com LAN17222 User’s Manual RTD Embedded Technologies, Inc.

  • Page 20: Limited Warranty

    During the one year warranty period, RTD Embedded Technologies will repair or replace, at its option, any defective products or parts at no additional charge, provided that the product is returned, shipping prepaid, to RTD Embedded Technologies. All replaced parts and products become the property of RTD Embedded Technologies.
  • Page 21 RTD Embedded Technologies, Inc. 103 Innovation Boulevard State College, PA 16803 USA Telephone: 814-234-8087 Fax: 814-234-5218 www.rtd.com sales@rtd.com techsupport@rtd.com Copyright 2015 by RTD Embedded Technologies, Inc. All rights reserved.

This manual is also suitable for:

Lan17222hr

Table of Contents