Table of Contents
Advertisement
4. Select
LNB
/
Satellite
Select
IN 1
/
IN 2
●
1) Set
LNB
first.
– If you set to
– If you set to
AB.
– If you set to
2) Set
Satellite
for the selected LNB.
– Select
No Satellite
(Available satellite will be searched in
– Select
User defined
– If you set to
Band,
User Band Frequency
Cable router you use). For details, read the manual of the Single
Cable router.
Watching > Tuning and editing channels > Selectable satellites
5. Press
BACK/RETURN
6. Select
Auto Setup
7. Select
Search Mode
8. Set with
/
and press
Scan Mode
●
Full:
Scans the whole frequency range.
Quick:
Scans the suitable frequency for the selected satellite.
After settings, select
●
9. The confirmation screen is displayed and press
(Settings are made automatically.)
When the operation is completed, the channel at the lowest position will
●
be displayed.
with
/
and set with
in
Signal Input
with
One
LNB,
LNB
is not selectable.
MiniDiSEqC
or
Single
DiSEqC
1.0, select from LNB AA, AB, BA and BB.
if you do not know the connected satellite.
to set
Test Transponder Frequency
Single
Cable, additional settings are required. Set
and
to store.
with
/
and press
/
Scan Mode
with
OK
to store.
Start scan
with
- 87 -
/
.
/
to set for each tuner.
Cable, select from LNB AA and
Auto
Setup.)
PIN
(depending on the Single
OK
to access.
/
and press
OK
/
and press
OK
OK
to start
Auto
manually.
User
to access.
to search.
Setup.
Advertisement
Table of Contents
