Table of Contents
Advertisement
- Proxy: connect to the GPRS network using
the proxy server.
- GPRS settings: customise the settings
required for connecting to the GPRS
network.
When the proxy is set to Enable:
IP address: enter the gateway address.
Port: enter the port number.
APN: enter the access point name used for
the address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
When the proxy is set to Disable:
DNS1: enter the primary address.
DNS2: enter the secondary address.
APN: enter the access point name used for
the address of the GPRS network.
Login ID: enter the user ID.
Password: enter the password.
- Version: select an available OMA version
and maximum size limit for sending or
receiving messages.
Depending on your service provider, it may
not be possible to support the maximum limit
300 KB. In this case, try again after changing
the setting to 100 KB.
• Block number: specify phone numbers
from which messages will not be accepted.
Numbers specified here are also included in
the SMS blocking list.
• Message class: select the type of message
content you will add or the message size.
Text only: you can add only text of up to 30
KB.
Small imaging: you can add any type of
items, except for video, of up to 30 KB.
Moderate imaging: you can add any type
of items, except for video of up to 100 KB.
77
Advertisement
Table of Contents
