Philips GC1960/02 Manual page 4

Problem Possible cause
Water drips from You have put the iron
the soleplate in horizontal position
after the iron has while there was still
cooled down or water in the water
has been stored. tank.
Water spots These wet spots may
appear on the be caused by steam
garment during that has condensed
ironing. onto the ironing board.
If the underside of the
ironing board is wet,
wipe it dry with a piece
of dry cloth.
4
Solution
Empty the water tank and set the
steam control to position O after
use. Store the iron on its heel.
Iron wet spots without steam from
time to time to dry them.
To prevent steam from condensing
onto the ironing board, use an
ironing board with a wire mesh top.
4239.000.7217.1