Alamo GREATWHITE 7600A Operator's Manual page 13

WARNING! Do not operate Snow Blower if excessive vibration exists. Shut down
PTO and the Tractor engine. Inspect the Snow Blower to determine
the source of the vibration. If blades are missing or damaged replace
them immediately. Do not operate the Snow Blower until the blades
have been replaced and the Blower operates smoothly. Operating the
Snow Blower with excessive vibration can result in component failure
and broken objects to be thrown outward at very high velocities. To
reduce the possibility of property damage, serious injury, or even
death, never allow the Snow Blower to be operated with blades
missing.
DANGER! The rotating parts of this machine have been designed and tested for
rugged use. However, the blades and rotating members could fail
upon impact with heavy, solid objects such as metal guard rails and
concrete structures. Such impact could cause the broken objects to
be thrown outward at very high velocities. To reduce the possibility
of property damage, serious injury, or even death, never allow the
rotating blades to contact such obstacles.
DANGER! Always keep a careful lookout and use extreme care when working
around utility lines. Never allow the Snow Blower within 10 feet of
any Utility power or gas line. Heavy snow or ice storms can cause
utility lines to sag or drop to the ground. Do not operate this equip-
ment where power lines are on the ground. When working close to
Utility lines consult your electric or gas company for a safe code of
operation.
WARNING! Before dismounting to clear a clogged machine, place the transmission
in the park position, set the parking brake, shut down all power, including
the PTO and the engine and remove the key. Wait until all rotating
motion has stop before dismounting.
WARNING!
Snow can cover and hide solid objects such as guard rails, curbs,
concrete structures, large rocks, utility boxes, fire hydrants, etc. DO
NOT allow the rotating parts of the Snow Blower to contact such
items. Inspect the area before operating the Snow Blower. Mark all
solid items clearly with a pole and flag. To reduce the possibility of
property damage, serious injury, or even death, never allow the
rotating blades to contact such obstacles.
WARNING!
The Snow Blower can block the operators vision directly in front of
the Snow Blower. Inspect the area before operating the Snow
Blower and make sure that there are no obstacles, passersby, or
coworkers in the path of the Snow Blower.
7600A 06/05
© Alamo Group Inc.
2005
SAFETY
(SSB-12)
(SSB-15)
Safety Section 1-9
(SSB-13)
(SSB-16)
(SSB-20)
(SSB-22)