Table of Contents
Advertisement
Quick Links
Chain Hoists (Chain Block)
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools policy
of continuous improvement determines the right to make modifications without prior warning.
0.5,1,2,3,5 tonne
Stock Nos.26164
EFFECTIVE USE OF THIS PRODUCT.
INSTRUCTIONS FOR
Part Nos.CH500B
26167
26177
26178
26186
CH1000B
CH2000B
CH3000B
CH5000B
Advertisement
Table of Contents
Related Manuals for Draper CH500B
Summary of Contents for Draper CH500B
- Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
-
Page 2: Title Page
Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact. -
Page 3: Table Of Contents
CONTENTS 2.1 CONTENTS Page content Page TITLE PAGE INTRODUCTION ....................2 REVISION HISTORY................... 2 UNDERSTANDING THIS MANUAL ..............2 COPYRIGHT NOTICE ..................2 CONTENTS CONTENTS ....................... 3 GUARANTEE GUARANTEE ....................4 INTRODUCTION SCOPE ....................... 5 SPECIFICATION ....................5 HANDLING & STORAGE ................... 5 HEALTH &... -
Page 4: Guarantee
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period. -
Page 5: Introduction
4.1 SCOPE This hoist is for lifting not pulling. 4.2 SPECIFICATION Stock No.......26164..... 26167....26177....26178....26186 Part No....... CH500B ..CH1000B ..CH2000B ..CH3000B ..CH5000B Load .........500kgs...1000kgs..2000kgs ..3000kgs ..5000kgs Test load ......750kgs...1500kgs..3000kgs ..4500kgs ..7500kgs Lift height ...... -
Page 6: Health & Safety Information
HEALTH & SAFETY INFORMATION 5.1 GENERAL SAFETY INSTRUCTIONS WARNING: - Before the use of this or any other lifting equipment all persons who install, operate or maintain this equipment should read and fully understand this manual. If chain hoists or any other lifting equipment presents the possibility of personal injury or damage to property, then it should not be used. -
Page 7: Unpacking & Checking
UNPACKING & CHECKING 6.1 PACKAGING After removing the packing material, make sure the product is in perfect condition and that there are no visible damaged parts. If in doubt, do not use the product and contact the dealer from whom it was purchased. The packaging materials (plastic bags, polystyrene, etc.), must be disposed of in an appropriate refuse collection container. -
Page 8: Health & Safety Information
HEALTH & SAFETY INFORMATION Always ensure that the product is fully inspected before every use, this will prevent damage or serious injury to person. 7.1 FREQUENT INSPECTION A visual inspection is to be carried out by a trained person before every use. This inspection should consist of: - Evidence of slippage on the braking mechanisms. -
Page 9: Operation & Use
OPERATION AND USE 8.1 WARNING: Before each use ensure that the lever hoist is fully inspected. Ensure that all chains are not twisted. The hoist must always be rigged to lift in a straight line. The hoist must always be free to swivel on the upper hook and not be disrupted in any way. -
Page 10: Maintenance
MAINTENANCE Care should be taken when handling and disposing of the lubricants. Clean the chain with a non-acid and non-caustic type solvent. 9.1 HOOK INSPECTION: Hooks damaged from chemicals, deformations or crack, or that have more than a 10 degree twist from the plane of the unbent hook or excessive opening or seat wear must be replaced. - Page 11 10. MAINTENANCE Dia of Max. Length No of links Hoist Capacity Chain Allowable used to Gauge Stock Chain 500kgs 5.0mm 169.1mm 1000-2000kgs 6.0mm 203.0mm 3000kgs 8.0mm 270.6mm 5000kgs 10.0mm 338.3mm HAND CHAIN: The hand chain should be cleaned, inspected and gauged in the same manner as the load chain.
-
Page 12: Contacts
- Sales Fax: (023) 8049 4209 - General Enquiries: (023) 8026 6355 - Service/Warranty Repair Agent For aftersales servicing or warranty repairs, please contact the Draper Tools Helpline for details of an agent in your local area. YOUR DRAPER STOCKIST RWLJ040313...
Need help?
Do you have a question about the CH500B and is the answer not in the manual?
Questions and answers