LG WF-T13D80EP Owner's Manual page 29

C
onnecting Water Supply Hose
Screw Type
1
Attach the water supply hose to the tap.
Push the water supply hose up so that the rubber packing
within the hose can adhere completely to the tap.
2
Connect the water supply hose to the tap.
Connect the water supply hose to the tap and then tighten it
by screwing it to the right.
3
Check water leakage.
After connecting the hose, open the tap to check for any
water leakage.
Connecting Water Supply Hose to the machine
Connect the water supply hose to inlet valve of the washing
machine, and then lock it by turning the hose connecting
part.
Check to see if there is a rubber seal inside the connector.
When the water supply hose is to be extended (Option)
purchase the water supply hose for extension at the LG
electronics agent or service center.
Using the connector of the water supply hose,
connect it to the water supply hose. (commercial item)
When either of cold or hot water supply hoses is used,
you can connect the hose which is not used to the
connector of the water supply hose.
Warning : Please don't connect the hot water only.
Water
tap
Hose connector
Water supply hose
Rubber Packing
Water Supply Hose
Hot
Cold
Rubber seal
Water supply hose
The connector of the
water supply hose
29