Table of Contents
Advertisement
en Cleaning and servicing
18.7 Cleaning the water inlet
filter
Emptying the water inlet hose
In order to clean the filter, first empty
the water inlet hose.
Turn off the tap.
1.
Set the algodón/algodão pro-
2.
gramme.
Start the programme and leave it
3.
to run for approx. 70 seconds.
Switch off the appliance.
4.
Disconnect the appliance's mains
5.
plug from the power supply.
Cleaning the filter on the tap
Note: Please read the information in
the sections on Safety → Page 4 and
Preventing material damage
→ Page 10.
Requirement: The water inlet hose is
empty.
Remove the water inlet hose from
1.
the tap.
54
Clean the filter with a small brush.
2.
Connect the water inlet hose and
3.
check for leaks.
Advertisement
Table of Contents
