en Installation and connection
Pull the hoses out of the holders.
1.
Unscrew
and remove
2.
screws for the transit bolts with a
WAF 13 wrench.
Pull the power cable out of the
3.
holder.
14
Remove the 4 sleeves.
4.
all 4
Put on the 4 cover caps.
5.
Press down on the 4 cover caps.
6.
4.5 Connecting the appliance
Connecting the water inlet hose
Note: Observe the information on
safety → Page 4 and preventing ma-
terial damage → Page 10.