Fig. 106: Installing The Uncoupled Filter Silencer; Table 67: Tightening Torque (72054) - ABB A150-M Series Operation Manual

Operation Manual / A150-M56/66/57/67 - A155-M..
11 Dismantling and fitting, cartridge concept / 11.12 Installing air inlets
A155-M Uncoupled filter silencer
Fig. 106: Installing the uncoupled filter silencer
Product Size Tightening torque [Nm]
A155 M16 275
Table 67: Tightening torque (72054)
1. Secure lifting gear to filter silencer (81000).
2. Install the filter silencer (81000).
3. Fit the hexagon nuts (72054) together with Verbus Ripp® washers (72053) and three new
safety plates (72055) (uniformly at 120° to one another). Observe the tightening torque.
© Copyright 2021 ABB. All rights reserved. HZTL4032_EN Rev.R August 2021