Table of Contents
Advertisement
Available languages
Available languages
How to clean and sterilise your
pump
(see diagram A)
NEVER WASH OR STERILISE...
the control handle (a), battery pack (i)
or mains power lead (j).
These components DO NOT come
into contact with your breast milk.
You can wipe the control
a
j
i
handle clean, using a soft cloth.
Cleaning and sterilising the pump body
and breast milk storage components
Before you use your breast pump for the first time
and every time before use, you must disassemble,
wash and sterilise all the breast pump parts that
come into contact with your breast milk.
You can use the dishwasher (top rack only) or hand
wash in warm, soapy water and then rinse thoroughly.
Do not use antibacterial or abrasive cleaners/
detergents as they may cause the plastic to crack.
To clean the valve, rub gently between your fingers
in warm soapy water – do not insert objects as
this may cause damage.
n
Sterilise these parts in a steam steriliser (digital,
electric or microwave), or by boiling in water for
5 minutes.
Keeping your pump sterilised
d
and compact for travel
g
After sterilising all parts, insert the white valve and diaphragm
into the pump body. Clip the funnel cover (h) over the funnel
and Let-down Massage Cushion (g) and screw the sealing base
h
(n) onto the pump body (d) in place of the milk container.
10
Advertisement
Table of Contents
