Table of Contents
Advertisement
Selecting Units of Measure
these steps cycles through the units available for barometric pressure: millibars, mil-
limeters, inches, and hectoPascals.
BAROMETER
Displaying Units: Barometric Pressure Units: millibars (mb), millimeters (mm) and
Wind Speed and Direction
Press WIND to select wind speed.
3. Wind speed may be displayed in miles per hour (m.p.h.), kilometers per
hour (km/h), meters per second (m/s), and knots (knots). The 10 minute
average wind speed will be displayed in the ticker.
A solid arrow within the compass rose indicates the current wind direction. Arrow
caps indicate up to six different 10-minute dominant wind directions to provide a
history of the dominant wind directions for the past hour.
4. Press WIND a second time to display the wind direction
in degrees instead of the wind speed. When displayed in
degrees, Due North displays as 360
firmware dated May 2005 or later. Previous releases
marked Due North at 0
Each additional WIND key press toggles the display
between wind speed and wind direction in degrees.
Note:
If your anemometer arm is not pointing true north, you should recalibrate the wind
direction reading on your console. See "Calibrate Wind Direction Reading" on
page 25 for more information.
Outside and Inside Temperature
1. Press TEMP to select outside temperature.
19
BAROMETER
mb
WIND
N
NE
NW
E
W
MPH
SW
SE
S
Wind Direction, Outside and Inside Temperature
º
.
mm
TEMP OUT
F
WIND
N
NW
NE
TEMP OUT
W
E
MPH
TEMP IN
SW
SE
S
Last 24 hrs
Every 1
hr
DAILY RAIN
Vertical Scale:
X10
º
for consoles with
BAROMETER
in
TEMP IN
F
pm
HUM OUT
BAROMETER
F
hPa
HUM IN
F
F
HEAT INDEX
RAIN
YEAR
in
in
STATION NO.1
360˚ N
˚
315˚ NW
˚
270˚ W
˚
˚
225˚ SW
˚
180˚ S
WIND
45˚ NE
˚
90˚ E
˚
˚
135˚ SE
Advertisement
Table of Contents
