Safety Symbols - Sentry ST-672 Instruction Manual

2-2 Safety symbols

Dangerous, refer to this manual before using the meter.
CE Certification.
This instrument conforms to the following standards:
En61326: Electrical equipment for measurement,
control and laboratory use.
IEC61000-4-2: Electrostatic discharge immunity test.
IEC61000-4-3: Radiated ,radio-frequency, electromagnetic
IEC61000-4-8: Power frequency magnetic field immunity test.
IEC60825-1: Safety.
Tests were conducted using a frequency range of 80-1000
MHZ with the instrument in three orientations.The average
error for the three orientations is ±0.5 C (±1.0 F) at 3V/m
throughout the spectrum. However, between 781-1000MHz
at 3V/m, the instrument may not meet its stated accuracy.
Restrict to use of six substances
RoHS
electrical and electronic equipment (EEE) ,
thereby contributing to the protection of
human
The device may not be disposed of with the trash.It
promotes the re-use recycling and other forms of
recovery of used materials and components, and to
improve the environmental performance of all
operators ( manufacturers , traders , treatment
facilities) involved in the life cycle of products.
Dispose of the product appropriately in accordance
with the regulations in force in your country.
field immunity test.
health
o
and the
3
o
within
environment.