4.3 Operation Functions
To operate more advance functions, it is simply by using
MODE button to change. The sequential operations and
the corresponding explanations are shown in the following
flow-chart.
Operation Mode
SCAN
MAX
MIN
AVG
T
DATA
Parameter Setup mode
HAL
LAL
●Scan and display the temperature
during measurement.
●The maximum temperature within
●The minimum temperature within
●The average temperature within
one shot measuring.
●The highest and lowest temperature
Mode
●Recall the stored data by using
● Emissivity for more accuracy
●Highest alarm temperature setting.
●Lowest alarm temperature setting.
(* The parameters are adjusted by
7
.
one shot measuring..
one shot measuring.
difference within one shot measuring
or
button.
on different materials.
using
or
buttons.)