Temperature Units; Energy-Saving Mode; Water Filter Symbol - Siemens iQ500 KA90G Series Instructions For Use And Installation

Hide thumbs Also See for iQ500 KA90G Series:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 33
Freezer compartment
Do not refreeze defrosted food. It can only be refrozen
after it has been made into a ready-to-eat meal (cooked
or roasted).
Do not then leave the food in the freezer for the
maximum storage period.
Without any risk to the frozen food, the alarm may be
triggered:
when the appliance is first used.
when putting large quantities of fresh food in the
freezer.
if the freezer compartment door is left open for too
long.
Switching off the alarm
Press the "alarm/lock" button.
Note
As soon as the set temperature is reached again, the
display stops showing "alarm".

Temperature units

The temperature can be displayed in degrees
Celsius (°C) or Fahrenheit (°F).
When the appliance is first switched on, the display
panel shows the temperature in degrees Celsius (°C).
Setting
1. Press the "alarm/lock" button.
The display panel shows the "Button lock" symbol.
2. Simultaneously press and hold the "light/filter" and
"water" buttons for 10 seconds.
The temperature units change.

Energy-saving mode

20 seconds after the doors are closed or the last
button is pressed, the display panel switches to energy-
saving mode. The display panel switches off and leaves
only the words "freeze" and "cool" and the symbol for
the selected dispenser mode (water, ice cubes or
crushed ice) dimly illuminated.
As soon as a door is opened or a button pressed, the
display panel switches on and returns to the normal
brightness.

Water filter symbol

This symbol indicates how long the filter cartridge can
still be used.
Up to six months
Up to four months
Up to two months
Up to 10 days:
the three bars of the symbol start flashing.
Change the filter cartridge.
Note
If the appliance is switched off, the water filter indicator
is reset.
After changing the filter cartridge, reset
the water filter indicator as follows:
Press and hold the "light/filter" button for 3 seconds.
The symbol will then stop flashing.
en
45

Advertisement

Table of Contents
loading

This manual is also suitable for:

Iq500 ka90d seriesIq500 ka90dvi30

Table of Contents