Advertisement
Inserting a Disc
• Insert the disc, label-side up, about quarter-way into the drive slot till a slight
resistance is felt.
• Gently push the disc further into the drive slot until the drive mechanism is heard
to engage and draw in the disc. Release the disc when the disc is pulled in by
the mechanism.
NOTE: 8 cm discs are not supported for Slot load drive.
Removing a Disc
• Select the Eject Command on OS/Applications, then the drive will eject the disc.
• Remove the disc.
Usage Guidelines
• Never use a damaged, broken, scratched, or deformed disc.
• Keeps the disc unloaded when not using the drive.
NOTES : High-speed drives spin the disc at a high rotational speed. If a disc has
printing on only half of the disc, or if there is a slight imbalance in the
disc, the imbalance is greatly magnified by the high speed, causing the
drive to vibrate or produce a fan-like noise. These effects are inherent in
the high-speed technology and do not indicate a problem with the drive.
5
Advertisement
