Hyundai FLR43TS511SMART Instruction Manual page 94

Power Up Mode
Virtual Remote
CEC
CEC Auto Power On
Speakers
Show All Cookies (*)
Delete All Cookies (*)
OSS
(*) These features may not be available depending on the model of your TV and the selected country in the First Time Installation.
Installation Menu Contents
Automatic Displays automatic tuning options. Digital Aerial: Searches and stores aerial DVB stations. Digital
channel scan Cable: Searches and stores cable DVB stations. Analogue: Searches and stores analogue stations.
(Retune) Satellite: Searches and stores satellite stations.
Manual channel
This feature can be used for direct broadcast entry.
scan
Network Searches for the linked channels in the broadcast system. Digital Aerial: Searches for aerial
channel scan network channels. Digital Cable: Searches for cable network channels.
Analogue fine You can use this setting for fine tuning analogue channels. This feature is not available if no
tune analogue channels are stored.
Displays satellite settings. Satellite list: Displays available satellites. You can Add, Delete satellites
Satellite
or Edit satellite settings on the list. Antenna installation: You can change satellite anntenna settings
Settings
and/or start a satellite scan.
Displays installation settings menu. Standby Search(*): Your TV will search for new or missing channels
while in standby. Any new found broadcasts will be shown. Dynamic Channel Update(*): If this option
Installation
is set as Enabled, the changes on the broadcasts such as frequency, channel name, subtitle language
Settings
etc., will be applied automatically while watching.
(Optional)
(*) Availability depends on model.
Using this menu, you can edit the main and backup home transponder parameters, including the Pid of
Setup Home
the related M7 operator, which are used to download the channel list. Set your preferences and press
Transponder the Green button to save the settings. Then start an M7 operator installation using the Automatic
channel scan>Satellite menu.
Clear Service Use this setting to clear channels stored. This setting is visible only when the Country option is set to
List
Denmark, Sweden, Norway or Finland.
Select Active This setting allows you to select only the broadcasts within the selected network to be listed in the
Network channel list. This feature is available only for the country option of Norway.
First time
Deletes all stored channels and settings, resets TV to factory settings.
installation
This setting configures the power up mode preference. Last State and Standby options are
available.
Enable or disable the virtual remote feature.
With this setting you can enable and disable CEC functionality completely. Press Left or
Right button to enable or disable the feature.
This function allows the connected HDMI-CEC compatible device to turn on the TV and switch
to its input source automatically. Press Left or Right button to enable or disable the feature.
To hear the TV audio from the connected compatible audio device set as Amplifier. You can
use the remote control of the TV to control the volume of the audio device.
Displays all saved cookies.
Deletes all saved cookies.
Displays Open Source Software license information.
English - 93 -