LG CineBeam HU80KS Owner's Manual page 11

• Do not use high voltage electrical
equipment near the projector, (e.g.,
a bug zapper). This may result in
product malfunction.
•
Please be sure that the projector's
aperture (lens and mirror) is not
blocked by a person or any objects.
• Be careful of the air vent because
it becomes hot if the projector is
powered on for a long period of
time. Such a rise in temperature in
the air vent is not a defect and does
not cause problems in the product's
operation.
•
Do not hold or move the product
upside down by holding just the
power cord, signal cable, projection
mirror, etc.
- Doing so may damage the
product or cause an electric
shock or fire.
• As long as the power cord is
plugged in, the product will not be
completely powered off even after
it is turned off.
Cleaning
WARNING
•
Do not spray the projector with
water when cleaning. Make sure
water does not flow into the
projector.
- This may result in fire or electric
shock.
•
When there is smoke or a strange
smell coming out from the projector
or a foreign object falls into the
projector, please switch it off and
unplug it from the power outlet and
contact our service center.
- Otherwise, this may result in fire
or electric shock.
11