Advertisement
Instruction Manual for LED Underwater Light HT029C-P-T
Manufacturer: Hentech Technology Development Co., LTD
Add: No. 58 Tianren Industrial Estate, Liandu Village, Leliu Town, Shunde District,
Foshan City, Guangdong, China 528322
Telephone: +86-757-22609165/22609168/22609169
Fax: +86-757-22609170
Website: http://www.hentech.cn/en
IMPORTANT: This manual includes essential information on the safety measures to be
implemented for installation and start-up. Therefore, the installer, as well as the user,
must read these instructions before beginning installation and start-up.
Technical Specification
Standard input voltage: 12V AC/DC (Range: 12~18VAC or DC)
Standard input watt:
RGB
18W
23W
30W
33W
21W
Use life: 60,000 hours
16 programs with Synchronization capability
Dimensions:
White
26W
33W
36W
Advertisement
Table of Contents
Related Manuals for hentech HT029C-P-T
Summary of Contents for hentech HT029C-P-T
- Page 1 Instruction Manual for LED Underwater Light HT029C-P-T IMPORTANT: This manual includes essential information on the safety measures to be implemented for installation and start-up. Therefore, the installer, as well as the user, must read these instructions before beginning installation and start-up.
- Page 3 The below drawing shows how to connect the cable from the lamp to the power source. Chart of parts Maintenance & Replacement There is no maintenance required for this lamp – it is designed to be used only once, meaning The parts marked with * are not included and needs to buy separately.
- Page 4 • To achieve synchronization, confirm all lamps are installed correctly on the same switch, after they are powered off for more than 20 seconds, switch on and switch off continuously three times, and then finally turn them on again. They will all go to program 5. Now you can select a program for them by switch off and on within 8 seconds.
Need help?
Do you have a question about the HT029C-P-T and is the answer not in the manual?
Questions and answers