Table of Contents
Advertisement
Lamp Settings
When ambient
temperature is
over 40°C in
operating,.the.
projector will
switch to Eco
automatically.
"Lamp Mode" can
be indipendently
set.for.2D.and.
3D.
OPTIONS |
Lamp Hours
Display the projection time.
Lamp Reminder
Choose this function to show or to hide the warning message
when the changing lamp message is displayed.
The message will appear 30 hours before suggested replacement
of lamp.
Lamp Mode
Bright: Choose."Bright".to.increase.the.brightness.
Eco.: Choose "Eco." to dim the projector lamp which will lower
power consumption and extend the lamp life.
Dynamic: Choose "Dynamic" to dim the lamp power which will
be based on brightness level of the content and adjust lamp
power consumption between 100% and 30% dynamically. The
lamp life will be extended.
Lamp Reset
Reset the lamp hour counter after replacing the lamp.
User Controls
OPTIONS
Lamp Settings
Lamp Hours
Lamp Reminder
Lamp Mode
Lamp Reset
On
Bright
..
..Exit
49
English
Advertisement
Table of Contents
