Ice Maker Troubleshooting - Electrolux EBE5307SBR User Manual

Table of Contents

Advertisement

26
electrolux.com.au
GENERAL INFORMATION (CONTINUED)
TROUBLESHOOTING
Door operation
Concern
Freezer door pops open.
Self close not working.
Door not sealing properly
Door difficult to open and close
Automatic Ice maker system
Concern
Ice maker does not produce ice or not
enough ice
The icemaker is designed to produce a tray
of ice approximately every 3 hours,
depending on room temperature and
water temperature..
Ice has bad odour or taste
If you still require service
If you have a problem, and the problem persists after you
have made the checks mentioned, contact your nearest
Electrolux approved Service Centre or the dealer you
bought the refrigerator from. Be ready to quote the model
number, the 9-digit PNC and 8-digit serial number, which is
stated on the label inside the refrigerator compartment.
What to do
This is normal and should re-close. This happens when the refrigerator door is
closed too quickly.
If the freezer door stays open, it indicates that the appliance needs to be tilted
backwards a little further. Refer to section "Installing your new appliance".
Check if your appliance has self closing hinges as not all models do.
It indicates that the appliance needs to be tilted backwards a little further. Refer to
section "Installing your new appliance".
Ensure there is nothing that is preventing the door from closing such as appliance
contents or items placed near the appliance.
Ensure that the crisper/freezer bin is closed completely. Refit if required as referred to
in the section "Using your refrigerator".
Ensure the appliance is set up as per recommendations.
If the door is difficult to open just after you have closed it this is due to the pressure
equalising, the door will open normally after a few minutes.
What to do
Ensure that the cord is plugged into a live power outlet and outlet is switched on.
Ensure that water is connected and turned on and there are no kinks in the water
line.
Ensure that the Ice Maker is switched on at the user interface refer to "About the User
Interface" for details.
Check that the water filter is not blocked or out of date.
Check the water supply flow rate.
If the freezer compartment is too warm, refer to "freezer is too warm" then wait 24
hours for the freezer to reach ideal temperature.
Turn the unit off at the mains and leave for 2 minutes then turn the appliance back
on (this will reset the icemaker unit). Check for ice production after 24 hours.
Check that there is no obstruction under the ice maker and ensure the ice bin is
fitted correctly.
Cover food to ensure ice does not absorb foreign odours.
Check that the water filter is not out of date.
Interior of appliance or ice bin may require cleaning, refer to "Cleaning your
refrigerator".
Discard stale ice monthly and allow ice maker to produce a fresh supply.

Advertisement

Table of Contents
loading

Table of Contents