Philips HP6317/01 Manual page 8

EnglisH
8
Note: Make sure the + and - marks on the batteries match those in the
battery compartment.
4 Reattach the lower part of the appliance to the upper part.
The ladyshave is now ready for use.
using the appliance
shaving
1 Set the Trim/Shave slide to the 'Shave' position. (Fig. 4)
2 Put the desired shaving foil on the shaving head.
Use the golden shaving foil to shave the underarms (Fig. 5).
,
Use the golden shaving foil to shave the bikini zone (Fig. 6).
,
Use the silver shaving foil to shave the legs (Fig. 7).
,
Do not use the silver shaving foil to shave the underarms and the bikini
line to prevent injuries.
3 Switch on the ladyshave (Fig. 8).
4 Place the shaving unit gently on the skin and move the ladyshave
slowly against the direction of hair growth while pressing it lightly.
The angle between the skin and the ladyshave should be 70° to get
,
the best results. (Fig. 7)
trimming
Put the comb attachment onto the shaving head to trim the hairs
,
to an even length (about 5mm), e.g. in the bikini zone (Fig. 9).
The comb attachment can be put onto the shaving head in different
positions, depending on the area to be trimmed.
1 Set the Trim/Shave slide to the 'Trim' position. (Fig. 10)
2 To trim the bikini zone, place the comb attachment on the shaving
head with the recess of the attachment on the front of the
appliance (Fig. 11).