Rossmax WF260 Instruction Manual

Warranty Card
This instrument is covered by a 2 year guarantee from the date of
purchase, batteries and accessories are not included. The guarantee is
valid only on presentation of the warranty card completed or stamped
by the seller/dealer confirming date of purchase or the receipt. Open-
ing or altering the instrument invalidates the guarantee. The guarantee
does not cover damage, accidents or non-compliance with the instruc-
tion manual. Please contact your local seller/dealer or buying source or
www.rossmax.com.
Customer Name:
Address:
Telephone:
Gender: Male Female
Product Information
Date of purchase:
Store where purchased:
Manufacturer: Rossmax Swiss GmbH
Tramstrasse 16, CH-9442 Berneck, Switzerland
www.rossmax.com
6. Unit switch
The monitor displays "0.0" hold
"kg"(kilogram)to"lb"(pound)orto"st-lb"(stone:pound)
The monitor is ready to use and you may now start your body analysis. Before
0.0kgappears,pleasedon'tsteponthemonitor.Withoutfurtheractivitythemonitor
willautomaticallypower-off.Yourpersonaldataisstored.
8. Body Analysis
1. Turn the monitor on:
• Press button to turn on the monitor.
2. Select personal data number:
• Press or button to select your personal
data number.
3. Set personal data will be successively displayed:
Then "0.0 kg" indicating. The monitor is ready to use and you may now start your
body analysis.
4. Step onto measurement platform carefully with bare feet on the stainless steel
strips (measuring units) of the monitor and remain stationary.
 A tfirst,yourweightwillbeindicated.Then,whiletheanalysisistakingplace,the
indication. A few seconds later after completion of the measurement
yourmeasuredvalues(bodyfatin%,musclein%,bonemassinkg,bodyhydrationin
%,BMRandBMI)willbeshowntwotimesalternately,andthenthemonitorswitch-
off automatically.
E-mail address:
Age:
button to select your desired unit from
Glass Body Fat Monitor
9. Weight function (weight measurement only)
1.Gentlysteponthemonitor,thenthemonitorwillbe
automatically turned on.
2. The monitor indicates "0.0 kg". Now the monitor is
readytouse.Before0.0kgappears,pleasedon'tstepon
the monitor.
3. S teponthemonitor.Remainstationaryontheweighingplatformanddonothold
you tight.
4.  A fterthemonitorlevelled-off,yourweightwillbeindicatedforapprox10seconds
steady.Afterwardsthemonitorswitch-offautomatically.
10. Error Messages
"LO": B atteriesareusedup-Pleasereplacethebatterieswiththeintendedtype
(3xAAA).
"Err": 1. Not bare feet for taking body fat measurement.
2. Step off the monitor before body fat analysis procedure complete.
3. Not step onto the electrodes for body fat measuring.
4. T hesolesofyourfeetarenotclean,e.g.feetperspiration..etc.tointerfere
the body fat measurement.
"O-Ld": T heweightexceedsthemaximumcapacityof180kg.Pleaseimmediately
remove the critical load to avoid load cell damage.
"C" : Afterthemonitorindicates"0.0kg",movethemonitoragain.
11. Technical Data
Capacityxgraduation:
Displayresolution:
Bodyfat:5.0~75.0%
Bodyhydration:5.0~75.0%
Bodymuscle:5.0~75.0%
Bonemass:0.5~22.6kg
Personalmemorylocation:
Age:
Bodyheight:
Dimensions:
Batteries:
operationcondition:
storagecondition:
*Subjecttotechnicalmodifications
with Scale
Model:
WF260
EN
Instruction Manual
www.rossmax.com
max.180kgx100g
bodyfat:0.1%
10positions
6–100years
80–220cm
approx.300x300x24.4mm
3xAAA(included)
0~40°C,≤90%RH
-20~60°C,≤90%RH