Recording A Song: Sound Mode - Kawai ANYTIMEX3 Owner's Manual

2

. Recording a song: Sound mode

In Sound mode, this instrument allows up to 10 different songs to be recorded, stored in internal memory, and
immediately played back. In addition, each song can consist of two separate tracks – referred to as "parts" – that
can be recorded and played back independently. This allows the left-hand part of a song to be recorded first on one
track, and the right-hand part to be recorded later on the other track.
„Recorder bar
„
Tap the Recorder bar to expand the Recorder.
a Recorder bar
Tap to close the Recorder settings.
b Recorder menu button
Tap to open the Recorder menu.
c Recorder mode
Tap to select whether the Recorder should record to internal
memory or USB memory.
* If a USB memory device is connected to this instrument, USB
Audio mode will be selected automatically.
If a USB memory device is not connected, this setting will not be
shown, and the Internal recorder mode will be used.
d Song memory selection
Swipe left/right or tap the arrow buttons to change the song
memory to be used for recording.
* In Sound mode, up to 10 songs can be recorded.
e Play/Stop button
Tap to Play/Stop the currently selected song.
f Part record selection button
Tap to select which part (part 1 or part 2) of the song to record.
When a part is selected for recording, the circle will turn red.
g Part playback selection button
Tap to select which part (part 1 or part 2) of the song to playback.
Part has not been recorded to.
Part has been recorded, and is enabled for playback.
Part has been recorded, but is not enabled for playback.
h Record Start/Stop button
Tap to place the Recorder in Standby, then tap again to Start/
Stop recording.
i Metronome bar /
Metronome Start/Stop button
Tap to open the Metronome settings and/or Start/Stop the
metronome.
a
b
c
d
e
f
g
h
i
39