Connecting To Other Devices - Kawai ANYTIMEX3 Owner's Manual

Connecting to Other Devices

Connecting to Other Devices
This instrument features a variety of jacks that allow the instrument to be connected to MIDI devices, computers,
speakers, and mixers. It is also possible to connect external audio sources, such as an MP3 player, tablet, or a
secondary keyboard, to this instrument's amplifier and speaker system. The illustration below provides a visual
overview of the connectors and their typical applications.
USB type "B"
USB type "A"
Connect this instrument
to a computer or tablet
to send or receive MIDI
data.
Before connecting this instrument to other devices, ensure that the power to both the instrument and the other
device is turned off. If connections are established while the power is turned on, extraneous noise that can
damage this instrument may activate the instrument's amplifier protection circuit, preventing any sound from
being produced. If this occurs, turn the power off and then on again to reset the amplifier protection circuit.
Do not connect the LINE IN and LINE OUT jacks of this instrument together with the same cable. An audio loop
(oscillation sound) will occur, resulting in damage to the unit.
144
Connect this instrument
to MIDI modules, other
instruments/devices, etc.
Connect the audio from
other devices to this
instrument's speakers.
Connect this instrument
to external speakers,
amplifiers, mixers, etc.