Siemens WM14Y740ES Instruction Manual And Installation Instructions page 20

Ø
Pause:
– If there is a high water level, high temperature or if the drum
²
– Load display is not active during relosding.
– Do not leave washing machine door open for a prolonged
Ø
Ø
20
Topping up washing
When the programme has started, washing can be reloaded
or taken out as required.
Select inicio/pausa+carga
c
60°C
Reload is possible
b
is rotating, the washing machine door remains locked for
reasons of safety and reload is not possible. Follow the
information on the display panel. To continue the pro-
gramme, select the inicio/pausa+carga
Pause) button. The washing machine door is locked and the
programme continues automatically.
period – water could run out of the washing.
Changing the programme sequence
if you have mistakenly started a wrong programme:
1. Select inicio/pausa+carga
2. Select another programme.
3. Select inicio/pausa+carga
programme starts from the beginning.
Cancelling the programme
For programmes at high temperature:
1. Select inicio/pausa+carga
2. Cool down washing: select Rinse (see
(Others)).
3. Select inicio/pausa+carga
For programmes at low temperature:
1. Select inicio/pausa+carga
2. Select Spin or Drain (see
3. Select inicio/pausa+carga
(Start/Pause).
Ü
c
2:31h
1400
0
b
(Start/Pause).
Ü
(Start/Pause). The new
Ü
(Start/Pause).
Ü
(Start/Pause).
Ü
(Start/Pause).
Ü
programas adic.
(Start/Pause).
Ü
˜
(Start/
Ü
programas adic.
(Others)).