Extra-Thorough Cleaning Method - Philips 1280X/45 Manual

ENGLISH
34

Extra-thorough cleaning method

Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn razor OFF.
C
2 Pull the shaving unit straight off the razor.
Do not turn the shaving unit when you pull it off
the razor.
C
3 Using your thumb and forefinger, grasp the
sides of the shaving head near the center
of the shaving unit and pull each individual
shaving head open.
C
4 Press the retainer release tab (1) until the
1
retainer opens (2).
2
C
5 Remove the cutter from the comb.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally put a cutter in the wrong comb, it
may take several weeks before optimal shaving
performance is restored.
C
6 Clean the cutter with the cleaning brush
supplied.
C
7 Clean the inside of the comb.
C
8
After cleaning, place the cutter back into
the comb with the cutter legs pointing
downwards.
9 Repeat the process for the other two
cutters and combs.
C
10
Press down the retainer over the cutter.
C
11 Close the shaving heads.
ENGLISH
35