Use Your Soundstage; Adjust The Volume; Choose Your Sound - Philips SoundStage HTL4110B/93 User Manual

1
Using an optical cable, connect the
OPTICAL IN connector on your
SoundStage to the OPTICAL OUT
connector on the TV or other device.
• The digital optical connector might be
labeled SPDIF or SPDIF OUT.
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
1
Using a coaxial cable, connect the
COAXIAL IN connector on your
SoundStage to the COAXIAL/DIGITAL
OUT connector on the TV or other
device.
• The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
Option 3: Connect audio through
analog audio cables
Basic quality audio
1
Using an analog cable, connect the AUX
IN connector on your SoundStage to the
AUDIO OUT connectors on the TV or
other device.
EN
8
5 Use your
This section helps you use the SoundStage to
play media from a wide range of sources.
Before you start
•
•

Adjust the volume

1

Choose your sound

This section helps you choose the ideal sound
for your video or music.
Surround sound mode
Experience an immersive audio experience with
surround sound modes.
1
Equalizer
VCR
Change the high frequency (treble) and low
frequency (bass) settings of the SoundStage .
1
SoundStage
Make the necessary connections described
in Quick start guide and User manual.
Switch the TV to the correct source for
the SoundStage .
Rotate the power knob or press VOLUME
+/- on remote control to increase or
decrease a volume level.
• To mute sound, press
• To restore the sound, press
press VOLUME +/-.
Press SURR repeatedly to select surround
mode or stereo mode.
Press TREBLE +/- or BASS +/- to change
the treble or bass level.
.
again or