Switch On The Tv - Philips 37HFL3330/97 User Manual

Connect to a cable receiver box
PC IN
VGA AUDIO IN
HDMI 1 CVI 1
HDMI 2
CVI 2
75 Ω
L-AUDIO OUT-R
A cable receiver box can be connected to the TV
PC IN
VGA AUDIO IN
HDMI 1 CVI 1
HDMI 2
through the following connections:
CVI 2
L-AUDIO OUT-R 75 Ω
• ANTENNA (75
Ω)
• A/V (Composite Video and Audio)
• S-Video and Audio
• YPbPr (Component Video Input)
• HDMI
PC IN
VGA AUDIO IN
HDMI 1
HDMI 2 CVI 1
Y
Pb Pr L R
CVI 2
Connect a cable receiver box through
Y Pb Pr L R
component video input or HDMI
L - AUDIO OUT - R
75 Ω
PC IN
VGA AUDIO IN
HDMI 1 CVI 1
HDMI 2
CVI 2
75 Ω
L-AUDIO OUT-R
PC IN
VGA AUDIO IN
HDMI 1
HDMI 2 CVI 1
Y Pb Pr L R
CVI 2
Y Pb Pr L R
L - AUDIO OUT - R
75 Ω
PC IN
VGA AUDIO IN
HDMI 1 CVI 1
HDMI 2
CVI 2
L-AUDIO OUT-R 75 Ω
ANTENNA
ANTENNA
Cable Receiver Box
Cable Receiver Box
ANTENNA
Cable Receiver
Box
ANTENNA
Cable Receiver
Box
Connect the AC power cord
Warning
B
Verify that your voltage corresponds with
the voltage printed at the back of the TV.
Do not insert the AC power cord if the
voltage is different.
To connect the AC power cord
AC IN
1. Locate the power connector at the back of the
TV.
The location of the power connector varies
according to TV model.
2. Insert the AC power cord fully into the TV
power connector.
3. Connect the AC power cord plug to the power
outlet. Ensuring that the cord is tightly secured
at both ends.
4.5

Switch on the TV

Before you switch on the TV, check that the mains
cord is properly connected. Press
at the side of the TV, or press power button on
the remote control. The TV normally takes 10-15
seconds to start up and the following screen appears
the first time you turn on the TV.
HDMI 1
HDMI 2
AC IN
4
VOLUME
3
MENU
POWER
2
button
CHANNEL
1
5
POWER
VOLUME
MENU
CHANNEL
POWER
POWER
EN-9