Page 2
Colonial INSTALLATION GUIDE Clawfoof Freestanding Bath INSTALLATION Installation must be carried out by a licensed plumber in compliance with the Plumbing Code of Australia.. Check local and national building regulations before installation to ensure the below methods comply with the relevant codes. Tools required for installation: Silicone Gun, Spirit Level, Tape Measure, Pencil, Adjustable Spanner.
Page 3
Colonial INSTALLATION and CARE GUIDE Clawfoof Freestanding Bath Figure 2 Plug & Waste 40mm pop-down Flexible Connector <600 waste with 600mm flexible connector PW8 or PW8B Waste Pipe Waste Trap ® sanitary grade acrylic. Your Colonial Freestanding Bath is manufactured using Lucite To maintain your bath’s high gloss finish, please follow these simple instructions: General Cleaning Wipe acrylic with a mild soap or detergent and lukewarm water solution, using a clean microfiber cloth.
Page 4
1300 746 480 bpa.warranty@johnsonsuisse.com.au Visit www.johnsonsuisse.com.au to view full warranty terms. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for the major failure and for compensation for any other reasonably foreseeable loss or damage.
Need help?
Do you have a question about the Colonial JBTC2152 and is the answer not in the manual?
Questions and answers