Symbols; Warning - Pioneer PREMIER GM-X404 Owner's Manual

Bridgeable four-channel power amplifier
Hide thumbs Also See for PREMIER GM-X404:
Table of Contents

Advertisement

Available languages

Available languages

Symbols

The following two symbols are used in this
manual.
CAUTION
— never do this.
This symbol indicates dangerous
actions which must be avoided.
Note
— follow the instructions care-
fully.
This symbol indicates action which can
cause the equipment to fail if it is
wrongly performed.

WARNING

• For traffic safety and to maintain safe
driving conditions, keep the volume low
enough so that you can still hear normal
traffic sound.
• Check the connections of the power
supply and speakers if the fuse of the sold
separately special red battery wire [RD-
222] or the amplifier fuse blows. Detect
the cause and solve the problem, then
replace the fuse with another one of the
same size and rating.
• To prevent malfunction of the amplifier
and speakers, the protective circuit will
cut the power supply to the amplifier
(sound will stop) when an abnormal
condition occurs. In such a case, switch
the power of the system OFF, check
connection of the power supply and
speakers. Detect the cause and solve the
problem.
• Contact the dealer if you cannot detect
the cause.
• To prevent electric shock or short-circuit
during connection and installation, be
sure to disconnect the negative (–)
terminal of the battery beforehand.
• Always use the special red battery power
and ground wire [RD-222], which is sold
separately. Connect the special red
battery power wire directly to the car
battery and the black ground wire to the
car body. (The special red battery power
and ground wire [RD-222] are designed
so that the amplifier can be connected
safely.)
• Confirm that no parts are behind the
panel when drilling a hole for installation
of the amplifier. Be sure to protect all
cables and important equipment such as
fuel lines, brake lines and the electrical
wiring from damage.
• To ensure proper heat dissipation of the
amplifier, take care of the following
during installation.
— Allow adequate space above the
amplifier for proper ventilation.
— Do not cover the amplifier with a floor
mat or carpet.
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents