Table of Contents
Advertisement
Connect the analog camera to the Video In connector of the C24-CAMANL.
Next, connect the C24-CAMANL to the Device LAN port of your gateway with an Ethernet
cable. Finally, plug the power supplies for the camera and C24-CAMANL into an electrical
outlet.
Note: Once connected, the "POWER" and "NETWORK" LEDs on the front of the
C24-CAMANL will turn solid green.
Step 6. Click on "Continue" and follow the installation wizard instructions
firealarmresources.com
firealarmresources.com
5
Advertisement
Table of Contents
