[Manual tune]
It is possible to manually tune to a specific channel/frequency and add this to
the station list.
This function can be used to obtain the optimum reception for a specific
channel/frequency, taking into account the position of the aerial.
A rectangle will be displayed on first line of the display. The position
»
of this rectangle indicates the signal strength (the further towards
the right, the greater the signal strength).
The second line of the display shows the selected channel and its
»
frequency.The first line of the display shows a rectangle.
Tip
•
Adjust the position of the antenna to obtain the optimum signal strength.
[DRC]
Dynamic range control (DRC) adds or removes a degree of compensation
for the differences in the dynamic range between radio stations.
[DRC high] (DRC is switched on; the default setting
•
recommended for noisy environment.)
[DRC low] (DRC is set to half normal level.)
•
[DRC off] (DRC is switched off.)
•
[Full scan] and [Local scan]
Local scan is used to perform a small range of DAB radio search (in UK).
Full scan is used to perform a wide range of DAB radio search (outside UK).
Note
•
If no button is pressed within seven seconds, the menu exits.
EN
17