Storing Preset Stations; Setting Timer - Philips AE2790/12 User Manual

Radio

Storing preset stations

You can store up to 10 FM stations and 10
MW stations respectively on PRESET for
easy access.
1 In FM/MW mode, tune to your desired radio
station (See "Auto tuning" and "Manual tun-
ing").
2 Press MEMORY/AUTO SCAN once, and
then turn VOLUME +/- to select preset
numbers.
3 Press MEMORY/AUTO SCAN once to
store the preset station.
Helpful hints:
– If you have already saved a FM or MW station
in that preset number, it will be overwritten
by a new station.
– Preset FM stations and MW stations do not
overwrite each other.
Selecting a preset station
1 In FM/MW mode, press PRESET repeatedly
until your desired station is displayed.
2 Press and hold PRESET to switch between
stations fast.
Setting time
You can only set time in standby mode.
1 Press and hold DBB/SET TIME until hour
digit flashes.
2 Turn VOLUME +/- to set hour.
3 Press DBB/SET TIME once to confirm
➜ The minute digit flashes.
4 Turn VOLUME +/- to set minute.
5 Press DBB/SET TIME once to confirm.
➜ The set exits time setting.
Helpful hints:
– During setting time, if you press any other
button or do not operate for more than 10
seconds, the set automatically exits time set-
ting.

Setting timer

You can only set timer in standby mode.
1 Press and hold TIMER until
and hour digit flashes.
2 Turn VOLUME +/- to set hour.
3 Press TIMER once to confirm
➜ Minute digit flashes.
4 Turn VOLUME +/- to set minute.
5 Press TIMER once to confirm.
appears.
OFF
➜
➜ Hour digit flashes.
6 Turn VOLUME +/- to set hour.
7 Press TIMER once to confirm.
➜ Minute digit flashes.
8 Turn VOLUME +/- to set minute.
9 Press TIMER once to confirm.
➜ FM or MW flashes.
10 Turn VOLUME +/- to select sound source
for timer.
11 Press TIMER once to confirm.
➜ Volume level digit flashes.
12 Turn VOLUME +/- to set the volume level
for timer.
13 Press TIMER once to confirm and exit
timer setting.
When the set ON time is reached, the set
– jumps to the selected waveband and preset
station if the set is on.
– is switched on the set and jumps to the
selected waveband and preset station if the
set is off.
– flashes for one minute.
ON
When the set OFF time is reached, the set
– does not act if it is off.
– is switched off automatically if it is on.
– flashes for one minute.
OFF
Clock/Timer
appears
ON