Table of Contents
Advertisement
• If the device is not powered on, turn on the power manually, then
re-connect it.
PROGRAMING TRACK NUMBERS (You can program up to
20 tracks)
1 Press 9 to stop the playback.
2 Press PROG to enter the programming mode.
™ The current album number flashes.
3 Press ¡1 / 2™ to select a desired album number.
4 Press PROG to confirm.
™ The current track number flashes.
5 Press ¡1 / 2™ to select a desired track number.
6 Press PROG to confirm.
7 Repeat steps 3-6 to select and store all desired tracks.
8 To start playback of your programme, press 2;.
Helpful hints:
– Up to 999 playable audio files stored on a USB mass storage device
can be played on DC200.
– Up to 99 playable albums stored on a USB mass storage device can be
selected and displayed on DC200.
– Make sure that file names of MP3 files end with .mp3. and the file
names of WMA files end with .wma.
– For DRM protected WMA files, use Windows Media Player 10 (or
later) for conversion. Visit www.microsoft.com for details about
Windows Media Player and WM DRM (Windows Media Digital Rights
Management).
– For USB device playing, if the display shows "OL", it means that the USB device
is electrically overloading DC200. You need to change a USB device.
SLEEP
This set has a built-in sleep timer, which enables the radio to be
automatically switched off after a preset period of time.
Setting and switching off SLEEP
1 Set your timer by pressing SLEEP repeatedly until the desired timer option
appears.
Advertisement
Table of Contents
