Using Usb Connectivity - Philips DC200/93 User Manual

iPod Touch 4GB/8GB, 20GB, 40GB, iPod Photo
20GB/30GB/40GB/60GB, iPod Video 30GB/60GB/80GB, iPod Classic
80GB/160GB, Mini and Nano.
PLAYING iPod USING DC200
1 Remove the top cover of dock.
2 Snap the compatible iPod into the dock connector.
3 Press SOURCE repeatedly to switch on the iPod mode.
• Make sure that you have powered on Apple iPod before selecting iPod
source.
™ On the DC200's display, "iPod" is displayed when iPod is connected.
4 The connected iPod player will play automatically.
Notes:
– By using the buttons ( 2;, ¡1, 2™ and VOLUME ) on the DC200, the follow-
ing playback features are available: Play/Pause, selecting next/previous track, fast
forwarding/rewinding and changing volume.
– The buttons ( 2;, ¡1, 2™ and VOLUME ) on the DC200 can work only with
playback of the audio contents stored on the docked player.
– To navigate the iPod menu, you may use iPod MENU, 3 4 and OK buttons
on the set.
– When you press iPod MENU in iPod mode, 1 2 3 4 and OK buttons first
perform the navigation function, and then restore the original functions.
– For iPod operations and features, refer to the user manual of your iPod player.
– This set does not support iPod video output.

Using USB connectivity

• DC200 is fitted with a USB port on the top panel, offering a plug and play
feature which allows you to play, from your DC200, digital music and audio
contents stored on a USB mass storage device.
• Using a USB mass storage device, you can also enjoy all the features offered
by DC200.
Compatible USB mass storage devices:
With the DC200, you can use