Costway TL32833 Installation Instruction

ITEM:TL32833

Carefully open the carton, remove contents and lay out on cardboard or other

protective surface to avoid damage.

Check package contents against the Supplied Parts List in the next page to assure

that all components were received undamaged. Do not use damaged or defective

parts.

Carefully read all instructions before attempting installation.

Install and operate this device with care. Please read this instruction before

installation, and carefully follow all instructions contained herein. Use proper safety

equipment during installation.

Please call a qualified installation contractor for help if you don't understand these

directions or have any doubts about the safety of the installation.

Do not use this product for any purpose or in any configuration not explicitly specified

in this instruction. We hereby disclaims any and all liability for injury or damage

arising from incorrect assembly, incorrect mounting, or incorrect use of this product.

UNPACKING INSTRUCTIONS

Installation Instruction

English

Table of Contents

Do you have a question about the TL32833 and is the answer not in the manual?

Page 1 Installation Instruction English ITEM:TL32833 UNPACKING INSTRUCTIONS Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage. Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged. Do not use damaged or defective parts.
Page 2 Supplied Par ts List (1) Disconnected (1) VESA Plate with (1) 35mm Tube Support-a “C” Clamp-b Arm Assembled-c (4)M4x12 (4)M4x30 Bolt-e (8)M4 Washer-f (4)M4 Space-g Thumb Bolt-d (2)Tube Wire Clip-h (2)M10x15 Bolt-i (1)Allen Key-j (2)Arm Cable Ring-k Tools Required Phillips Screwdriver CAUTION! This monitor desktop mount must be securely attached to the horizontal desk.
Page 3 Install the “C” Clamp According to the Desktop Thickness Step 1 The depth of “C” clamp can be changed in three positions. Choose the proper depth a c c o r d i n g t o t h e t h i c k n e s s o f y o u r desktop.
Page 4 Mount the Monitor to VESA Plate Step 3 For Flat Back Monitor For Curved Back Monitor Adjust the Height and Install the Wire Clips Step 4 Manage the Wires by Wire Clips and Adjust the View Angle Step 5 Fasten the knob after adjust Thank you for choosing our products!