TABLE OF CONTENTS Introduction _____________________________________________ 3 Radio Interference Advise _________________________________ 3 Package Contents ________________________________________ 4 Monitor/Receiver _________________________________________ 4 Camera/Transmitter _______________________________________ 5 To Start Charging/Powering On ______________________________ 6 Locking the Screen ________________________________ 6 Set to Another Language ____________________________ 6 Pairing Camera and Monitor _________________________ 7 Main Menu ______________________________________________ 8 Touch Navigation Volume/Display ___________________________________ 9...
Operation with nonapproved equipment or unshielded cables is likely to result in interference to radio or TV reception. You are advised that changes and modifications not carried out on the equipment by the Molto technical service will not be covered by the product guarantee.
CAMERA Focus Retractable Ring Night Antenna Vision IR LEDs Night Light Camera PAIR Lens Button DC Power Input/ Mini USB Output ON/OFF Button Microphone Power ON Battery Compartment LED Indicator 2-Way Talk (not included) Lullaby Speaker Camera / Transmitter Unit features: •...
Button down for several seconds. The green “Power On” Indicator lights when powered up. Turn the Monitor On by holding its ON/OFF Button down for several seconds. Its “Power On” Indicator will light up (green on battery power, red when charging) and the MOLTO logo will appear on the screen.
PAIRING: The monitor and camera are paired (wirelessly linked) by the manufacturer at the fac- tory. If you ever need to relink the camera, or you want to pair Additional Cameras (sold separa- tely) you need to pair each following this sequence: NOTE: Before pairing be sure the camera and monitor are both turned on and both are within 10 feet of each other.
MAIN MENU ... touch the ESC Button to open the Main Menu on screen IMPORTANT: Use ONLY a fingertip or other NON-SHARP object to select touch screen options. Using sharp objects can damage the screen and void the warranty. Touch the appropriate icon to access all Settings and Options. VOLUME / DISPLAY LULLABYS NIGHT LIGHT...
TOUCH NAVIGATION ... touch the ESC Button to open the Main Menu on screen from Main Menu..to These Screens..to Do This... VOLUME / DISPLAY touch – or + icons to adjust... Monitor Volume Screen Contrast Screen Brightness select a Camera...
TOUCH NAVIGATION ... touch the ESC Button to open the Main Menu on screen from Main Menu..to These Screens..to Do This... touch one of four functions... Photo RECORD goes to camera view and you can take a photo of the scene by tou- ching this Still Camera icon TAKE PHOTO...
TOUCH NAVIGATION ... touch the ESC Button to open the Main Menu on screen from Main Menu..to These Screens..to Do This... touch to select one of two options... PLAY Video or Picture select Video or Picture select a folder for the Date of the Recording (year/month/day) select a Video or Picture File to...
TOUCH NAVIGATION ... touch the ESC Button to open the Main Menu on screen from Main Menu..to These Screens..to Do This... choose from these options... QUAD / CHANNEL Single Camera View select a Camera icon (1-4, which will be shown in color and active if paired)to be your constant chan- nel if choosing Single Camera...
TOUCH NAVIGATION ... touch the ESC Button to open the Main Menu on screen from Main Menu..to These Screens..to Do This... Monitor Settings SETTINGS on the Setting Screen, simply touch the System Setting icon (at the top) to access monitor functions...
Page 14
TOUCH NAVIGATION ... touch the ESC Button to open the Main Menu on screen from Main Menu..to These Screens..to Do This... SETTINGS (cont.) Monitor Settings From the Monitor Setting list... select TV Out Format choose either PAL or NTSC video format (EU standard is PAL) touch OK to set the Monitor Setting list...
Page 15
TOUCH NAVIGATION ... touch the ESC Button to open the Main Menu on screen from Main Menu..to These Screens..to Do This... Monitor Settings SETTINGS (cont.) the Monitor Setting list... From touch Video Off Timeout touch the timer icon to choose between non-active (X) or active (no X) Timeout Mode if active, touch the –...
Page 16
TOUCH NAVIGATION ... touch the ESC Button to open the Main Menu on screen from Main Menu..to These Screens..to Do This... Monitor Settings SETTINGS (cont.) From the Monitor Setting list... NOTE: Though shown here for reference, this function to be used ONLY for Updating System Fir- mware, to be downloaded and put onto an SD card, in order to be...
TOUCH NAVIGATION ... touch the ESC Button to open the Main Menu on screen from Main Menu..to These Screens..to Do This... Camera Settings SETTINGS (cont.) on the Setting Screen, simply touch the Camera icon (on the bottom line) for the one you wish to control the settings for...
INDIVIDUAL CAMERA and CONVENIENCE ICONS IMPORTANT: Use ONLY a fingertip or other NON-SHARP object to select touch screen options. Using sharp objects can damage the screen and void the warranty. Specific small icons are created for each paired camera at the top edge of the screen which relate to that individual camera (except Battery Level, which is for the monitor only).
3. wait for your computer to automatically recognize and install the appropriate drivers and you receive a Successful Installation message. 4. once you have installed the device driver, your Molto Baby Monitor can be utilized as a wireless webcam. 5. once the picture from the monitor is displayed on your computer screen, pressing the ESC Button on the monitor toggles between Single and Quad View modes.
AUDIO/VIDEO OUT You can hear and see audio/video output on a TV or other AV device directly from your Monitor. Simply connect the AV Out Cord (not included) to the AV OUT jack on the right side of the monitor and connect the other ends (three RCA connectors) to the Audio and Video Input jacks on your TV, DVR, or Camcorder, and select the appropriate input setting on that AV device.
FACTORY DEFAULT SETTINGS Item Default value Range Monitor Value Settings Volume Contrast Brightless Date & Time 2011/09/01,08:00 Alarm Time Off, 09:00 On , Off Date Time Stamp On , Off Auto Switch Time 5s,10s,30s,1min Recording Schedule On , Off Start Time : 12:00:00 End Time: 12:11:00 Zoom 1.0 a 3.0...
BATTERY REPLACEMENT Monitor Battery (included) Camera Battery(not included, sold separately) Li-Ion 3,7V 1200 mAh Li-Ion 3,7V 1500 mAh PRODUCT SAFETY •This product is not intended to be used as a medical monitor and its use should not replace adult supervision. CAUTION This product should not replace adult supervision.
CAMERA FOCUS ADJUSTMENT INSTRUCTIONS Occasionally you may need to adjust the camera lens for best focus. Note: The camera lens will only turn less than 45 degrees in either direction. Avoid any forceful turns which could damage the camera and possibly void the warranty. 1.
Page 24
MADE IN CHINA - FABRICADO EN CHINA - FABRIQUE EN CHINE DESIGNED AND MANUFACTURED BY - DISEÑADO Y FABRICADO POR - CONÇU ET FABRIQUÉ PAR MOLTO Y CIA, S.A. - N.R.I. 03-10142 Avda. Azorín, 18-P.O. Box nº 49 - 03440 IBI (ALICANTE) SPAIN.
Need help?
Do you have a question about the 12732 and is the answer not in the manual?
Questions and answers