7
Other features
Record
Note
•
To record, use only "Normal" (IEC type I) tapes on which the write-protect notches (tabs) are
not broken.
Tip
•
When you play or record a tape, the sound source cannot be changed.
•
The best recording level is set automatically. Change of volume and sound effect does not
affect recording.
Note
•
The quality of recorded sound can differ depending on the source and the tape used.
Record from CD to tape
1 Press CD to select disc source.
2 Load a disc.
3 Stop disc playback.
4 Press
to open the tape door.
5 Load a tape.
6 Press
to start recording.
Disc play starts automatically from the beginning of the disc.
»
•
To pause/resume recording, press
•
To stop recording, press
Record a section of a disc to tape
1 During disc play, press and hold
•
To select a track, press
2 Press
to pause disc play.
3 Press
to start recording.
Disc play resumes automatically.
»
•
To pause recording, press
•
To stop recording, press
Record from radio to tape
1 Tune to the desired radio station.
2 Open the tape button cover.
3 Press
to open the tape door.
.
.
/
to search, then release the button.
/
.
. To resume, press this button again.
.