7.2. Pump
In Tumble Dryer models, the pump is used
to transport the water that accumulates in
the condensation chamber to tank in the
drawer area. One triac is measured on the
electronic card.
Resistance : 764±10% ohm
Voltage: 220-240 Volt
Frequency: 50 Hz
Check the connection of the pump connector
Check the pump resistances
Check whether pump is working, by feeding externally
If the pump is working, the water in the tank is unloaded by running the pump Then,
Unload 500 ml of water from water tank to pump reservoir and check whether water is
pumping.
While pump is working, if water is not reached into water tank, hoses should be checked.
HP T2touch PANEL
SERVICE MANUAL
Technical Features
Input Power : 13W max
Component Test
CUSTOMER
SUPPORT