USB playability information
Compatible USB devices:
•
USB flash memory (USB 2.0 or USB1.1)
•
USB flash players (USB 2.0 or USB1.1)
•
memory cards (requires an additional
card reader to work with this apparatus)
Supported formats:
•
USB or memory file format FAT12,
FAT16, FAT32 (sector size: 512 bytes)
•
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
•
WMA v9 or earlier
•
Directory nesting up to a maximum of 8
levels
•
Number of albums/ folders: maximum 99
•
Number of tracks/titles: maximum 999
•
ID3 tag v2.0 or later
•
File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
•
Empty albums: an empty album is an
album that does not contain MP3/WMA
files, and is not be shown in the display.
•
Unsupported file formats are skipped. For
example, Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
•
AAC, WAV, PCM audio files
•
DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
•
WMA files in Lossless format
EN
20
8 Troubleshooting
Warning
•
Never remove the casing of this apparatus.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
apparatus, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips web site www.
philips.com/welcome. When you contact Philips,
ensure that the apparatus is nearby and the
model number and serial number are available.
No power
•
Ensure that the AC cord of the apparatus
is connected properly.
•
Ensure that there is power at the AC
outlet.
•
As a power-saving feature, the system
switches off automatically 15 minutes
after track play reaches the end and no
control is operated.
No disc detected
•
Insert a disc.
•
Check if the disc is inserted upside down.
•
Wait until the moisture condensation at
the lens has cleared.
•
Replace or clean the disc.
•
Use a finalized CD or correct format disc.
No picture
•
Check the video connection.
•
Turn on the TV to the correct Video-In
channel.
•
Progressive scan is activated but the TV
does not support progressive scan.