Download Print this page

Elo TouchSystems 4 I Series Quick Installation Manual

Android all-in-one power-over-ethernet (poe) module kit

Advertisement

Quick Links

Contents
1x Power-over-Ethernet (POE) Module
1x VESA mount spacer
2x M3x8 flat-head screws
VESA mounting screws
Power Limitation Note
The Power-over-Ethernet (POE) Module does not provide enough power to
support all I-Series system features. Some features are disabled when using the
POE Module. See the user guide for a detailed list of available features when
using this adaptor kit.
Elo Technical Support
Online self-help: www.elotouch.com/support
America
Europe (EMEA)
800-ELO-TOUCH
Tel +32 16 930 136
Tel +1 408 597 8000
emea.sales@elotouch.com
elosales.na@elotouch.com
The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively "Elo") makes no
representations or warranties with respect to the contents herein, and specifically disclaims any implied warranties of merchantability or fitness for a
particular purpose. Elo reserves the right to revise this publication and to make changes from time to time in the content hereof without obligation
of Elo to notify any person of such revisions or changes.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer
language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior
written permission of Elo Touch Solutions, Inc.
Elo and the Elo logo are either trademarks or registered trademarks of Elo Touch Solutions, Inc.
© 2021 Elo Touch Solutions, Inc. All rights reserved.
Power-over-Ethernet (POE) Module Kit
Asia Pacific
Tel +86 (21) 3329 1385
EloAsia@elotouch.com
Quick Installation Guide
I-Series 4 Android All-In-One
Revision A
P/N E988344
www.elotouch.com

Advertisement

loading

Summary of Contents for Elo TouchSystems 4 I Series

  • Page 1 Contents 1x Power-over-Ethernet (POE) Module 1x VESA mount spacer 2x M3x8 flat-head screws VESA mounting screws Power Limitation Note The Power-over-Ethernet (POE) Module does not provide enough power to support all I-Series system features. Some features are disabled when using the POE Module.
  • Page 2 Remove left side cable security cover and unplug ethernet and Plug Elo POE module into recess, ensuring connector on bottom of Optional 100x100 VESA spacer mounting: Place the spacer over the Elo power cable from the device before installing the Power-over- adaptor lines up with connector on back of the I-Series 4.